PropOne Silicone Remover 200ML

Silicone Remover - 200ml

Remove old PropOne coatings from your propellers and running gear with ease using PropOne Paint Stripper and Silicone Remover.

Features:

• Easy application – Brush on and it will do the rest!
• Reduce dust and noise – Easy removal
• Effectively allows multiple stubborn layers to be removed
• Marine Grade: DCM & NMP free*

PropOne Silicone Remover is designed to remove PropOne Clear Coat. It can also be used as a general-purpose silicone remover to remove thin coatings.

PropOne Paint Stripper will remove paints, varnishes, and lacquers. It is primarily to be used with PropOne Silicone Remover for the removal of PropOne Primer Coat.

Do not use on plastic surfaces or resin-impregnated wood fibreboard materials.

For plastics and other delicate surfaces, test a small area first to ensure Silicone Remover & Paint Stripper does not affect the underlying substrate.

Application:

• Remove all marine growth from the surface.
• Apply Silicone Remover approximately. 2mm thick using a brush. Tip: Prevent drying out by covering the treated area with cling wrap in hot/windy climates.
• Do not allow the remover to come in contact with water.
• Leave in contact for 2-3 hours or until softened.
• Remove with a stiff nylon or wire brush, scrubbing in a circular motion.
• Wipe off any remaining residue with a xylene or toluene-soaked cloth.
• If any coating remains after scraping, apply a second coat.
• Once done, proceed with Paint Stripper

*Does not contain toxic Dichloromethane and N-Methylpyrrolldone